Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The revolutionary Ghost immobiliser will protect your car from key-long theft as well as relay theft. Your car won't start if someone doesn't know your PIN code.
It also has Transport Mode that allows you to temporarily disable the device which is ideal for transportation and servicing. The device is then activated by entering a new PIN code.
No Key Fobs or Led Indications
The Ghost 2 immobiliser offers a effective defense against modern theft methods. Its undetectable installation and engine start blockage help to reduce the risk of your vehicle being stolen, which could offer peace of mind and potentially even reduce insurance premiums.
It cannot be detected by scanners and cannot be hacked using standard methods like key cloning and signal jamming. The device uses buttons on your vehicle, for instance those on the steering wheel and door panels, to create an unique PIN number that can be altered. This sequence can last for up to 20 times. Only the vehicle owner is allowed to start the engine when the right sequence or beacon or mobile app is used. This adds an extra layer of security against thieves.
You can also activate an easy service mode for situations such as valet parking or servicing that require you to temporarily disable the system. The mobile app makes it easy to do this, and ensures that your vehicle is safe during the time it is being repaired. It is simple to change to secure mode when the task is finished and ensure that your vehicle is secure at all times.
Unlike other immobilisers from the aftermarket that operate with a fob The Ghost 2 can be operated directly through the vehicles existing buttons, making it simpler to use than traditional systems. The app also functions as a spare key in emergencies and allows you to drive your vehicle with the security turned off without having to enter your PIN code.
No Radio Frequency Signals
The Ghost 2 immobiliser is not like other security systems which require a separate remote control. It can be controlled using the existing buttons on your console or steering wheel. The device is unnoticeable by thieves who use the RF scanning technology or code grabbing, so your car won't start for them should they steal your key.
The device locks the engine with a unique sequence of buttons. The PIN code can be entered via the app, or pressing the buttons on the steering column or the center console. This lets you secure the gearbox as well which means that your car can't be driven away until you have a key or capable of entering your pin code. The device can be set to transport mode, allowing you to drive your vehicle without entering the PIN code and providing your vehicle with additional security when it's being used for service or valet parking.
The Ghost 2 immobiliser was designed to be as subtle as it is possible to be as a theft deterrent. This makes it a great option for those who have invested many dollars on customizing their vehicles or own expensive or unique vehicles. Many people have testified that this is an excellent way to protect their cars from being stolen, with some even sharing stories of attempted thefts that were blocked by the device. The Ghost 2 also offers a wide range of options and customers have reported that it can be used with regular car keys and also with the emergency button on their vehicle, giving them peace of mind while they are away from their vehicle.
No Radio Frequency Scanners
Protect your vehicle from hacking, key cloning and key theft with the Ghost immobiliser. The system makes use of the buttons on your vehicle, such as those on the dashboard and your steering wheel, to create a unique, changeable sequence of buttons that only you can identify. Without this sequence, your car will not start. This combination of a unique disarm sequence and the absence of radio frequency signals makes the device extremely difficult to hack or disable.
The Ghost CAN Immobiliser is a better alternative to devices that are approved by Thatcham that rely on radio frequencies scanning. It works silently without external signals and does not rely on any external signals. It's a far safer option and comes with insurance-approved status when installed by an TASSA approved installer (we're one of them! ).
Due to the nature and way in which the Ghost immobiliser works with your vehicle, it is strongly recommended that a professional installer carry out its installation. This ensures that it's fully integrated with your vehicle's systems, which results in optimal performance and a significantly reduced risk of failure.
Professional installation is often supported by warranties and service to further enhance the value of your purchase. This is a major deterrent to would-be thieves who are less likely to attempt to evade the device because of its extensive security features.
As well as an excellent deterrent against thieves As well as a great deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly too. It can be programmed to automatically re-arm a certain amount of time after you have parked your vehicle. This means that you don't have to remember your PIN every time. It also provides the flexibility of Service/Valet Mode if you have to hand your vehicle to a service or valet parking. It can be disabled or enabled according to your preferences using a simple indication sequence.
No Wire Cutting
The Ghost 2 does not require cutting of any car wires in order to install it, ensuring a the non-invasive integration of the original systems of your vehicle. It connects to your vehicle's CAN data network and is programmable with a unique PIN code. This prevents anyone else from starting the engine if they do not have a specific sequence of PINs, or app authorization.
It's also silent, as it does not emit radio signals like other immobilisers. It's weatherproof and sealed. so small it can be concealed anywhere inside the vehicle, making it nearly impossible to locate.
Another benefit of the Ghost II is that it can be turned into "transport mode" for short durations without the need for a personalised PIN sequence. This is ideal for situations such as lending the car to a friend or family member or in emergency situations, allowing you to start your vehicle and drive away quickly and safely.
When installing the Ghost II, it's important to work in a well-lit area and wear safety equipment when working with electrical and tool components. A basic set of hand tools will enable you to create precise connections, and a multimeter can be used to determine electrical values and ensure that your wiring is safe. Insulation tape and cable ties can be used to secure or join any exposed or cut wires during the process of installing.
It's also vital to disconnect the battery before attempting any wiring work on your vehicle. This will prevent any airbag deployments or electrical shocks when the Ghost II is connected to the vehicle's electrical system while the battery is disconnected.
Easy to Install
The Ghost immobiliser is an exclusive next-generation device that operates by connecting directly to your vehicle's CAN Data Network and using a personalised PIN Code to prevent your vehicle from getting started. This makes it much harder to break than standard key fobs or alarm systems and offers greater security against key cloning hacking and relay attacks.
The device can be hidden inside your vehicle. it makes use of the buttons on your steering wheel and dashboard to create a unique sequence you only know. This stops thieves from being able to make use of a duplicate key to start your vehicle. It additionally, it prevents them from using the diagnostic tool that is based on hacking the OBD.
Installation is easy and requires no cutting of wires. The unit connects to the vehicle's CAN bus system via a constant 12V supply and an earth connection. A multimeter is required in order to determine the correct wires. Basic hand tools will suffice for the installation. Insulation tape or heat shrink tubing is recommended to protect the connections, and cable ties are a good option to keep the wiring tidy and tidy.
Once installed please click the next page is in a learning mode, and records your specific sequences and buttons to create your unique pin code. This information is stored in the CAN network which makes it virtually impossible for anyone to duplicate your sequence or start your vehicle.
Transport Mode is a feature that can be utilized in the event of an emergency, such as if you forget your PIN number, sell your vehicle or the button is not working. This will shut down the Ghost system completely, but will reactivate automatically when you reach 31mph for more than 15 minutes or when you enter your PIN Code. This is ideal for those who rent out their vehicles via services such as Turo or ZipCar.